Comprehensive Fibre Optic Connector Range: All Major Types at Fiber Products
Comprehensive Fibre Optic Connector Range: All Major Types at Fiber Products
LC, SC, E2000, ST, FC, MPO — as a telecommunications operator, you need flexibly configured systems to meet diverse network requirements. Fiber Products is the only manufacturer in the German, Austrian and Swiss markets to offer all major connector types in modular splice systems with up to 96 fibres in 1RU. The combination of Swiss precision engineering and German technical expertise enables maximum flexibility in network planning.
Complete Connector Range for Modular Splice Modules
Fibre optic network requirements vary widely — from legacy networks with older ST connections to modern MPO cabling with 12 or 24 fibres. As an official Diamond partner, Fiber Products manufactures splice modules with all relevant connector types in Europe.
The portfolio includes LC, SC, E2000, ST, FC and MPO connectors in various polishes (PC, APC, UPC). Telecommunications operators benefit from the ability to combine different connector types in a single system — ideal for heterogeneous network structures.
- LC connector: Compact form factor with 1.25 mm ferrule
- SC connector: Proven standard with 2.5 mm ferrule
- E2000 connector: Integrated protective shutter to IEC 61754-15
- ST connector: Bayonet coupling for legacy networks
- FC connector: Screw coupling for stable connections
- MPO/MTP: Multi-fibre connectors for 12, 24 or 48 fibres
LC Connector: The High-Density Standard for Modern Networks
LC connectors dominate modern FTTH deployment projects through their compact form factor. At only 6.25 mm wide, they enable double the port density compared to SC connectors. The push-pull mechanism simplifies installation in densely populated distribution frames.
In the SlimConnect 1RU modules, up to 48 LC duplex ports can be accommodated — equivalent to 96 individual fibres. Typical insertion loss values are < 0.25 dB for single-mode applications to IEC 61753-1.
| Feature | LC Standard | LC at Fiber Products |
|---|---|---|
| Ferrule diameter | 1.25 mm | 1.25 mm zirconia |
| Insertion loss SM | < 0.5 dB | < 0.25 dB |
| Return loss APC | > 55 dB | > 60 dB |
| Ports per 1RU | 24–48 | up to 96 |
| Mating cycles | 500 | > 1000 |
SC Connector: Proven Technology for Legacy Networks
SC connectors form the backbone of many existing fibre optic networks in the DACH region. With their 2.5 mm ceramic ferrule, they deliver robust connections for long-distance and backbone applications.
The VarioConnect 3RU systems accommodate up to 144 SC simplex connections. The square cross-section and push-pull latch ensure secure connections even under mechanical stress.
- Standards-compliant to IEC 61754-4
- Available in PC, UPC and APC polish
- Colour coding per TIA-568 (blue for SM/PC, green for SM/APC)
- Compatible with all common couplers
- Temperature range −40 °C to +85 °C
E2000 Connector: Swiss Precision with Integrated Protection
The E2000 connector embodies Swiss engineering excellence with its unique protective mechanism. As an official Diamond partner, Fiber Products manufactures E2000 connectors in original quality for demanding environments.
The spring-loaded shutter automatically protects the ferrule from contamination and damage. This significantly reduces downtime and maintenance costs — particularly relevant for critical infrastructure.
Fiber Products Quality Commitment: As an official Diamond partner and manufacturer, we produce modular splice systems in Europe. Benefit from Swiss precision and 5 years’ warranty on our systems.
E2000 connectors are optimal for outdoor installations, industrial environments and security-critical applications. Insertion loss values achieve < 0.20 dB at APC polish with return loss of > 65 dB.
ST and FC: Proven Coupling Systems for Specific Requirements
ST connectors with bayonet coupling and FC connectors with screw locking address specific network requirements. Both types are commonly found in older telecommunications networks and industrial applications.
| Connector Type | Coupling | Primary Application | Availability |
|---|---|---|---|
| ST | Bayonet | Legacy networks, LAN | SlimConnect & VarioConnect |
| FC | Screw | Test equipment, sensors | All Fiber Products modules |
The modular splice systems enable integration of these connector types alongside modern LC or SC connections. This greatly simplifies migration scenarios and network modernisation projects.
MPO/MTP: Multi-Fibre Solutions for Maximum Density
MPO connectors revolutionise data centre cabling through 12, 24 or even 48 fibres in a single connector. The rectangular ferrule with precision guide pins ensures precise fibre alignment.
- Standard: IEC 61754-7 and TIA-604-5
- Polarity: Type A, B or C configurable
- Insertion loss: < 0.35 dB typical
- Space saving: 75% reduction compared to individual fibres
- Installation time: 80% faster than LC individual connections
Fiber Products integrates MPO cassettes seamlessly into SlimConnect and VarioConnect systems. Breakout modules enable flexible distribution to LC or SC individual connections.
Combination Options in Modular Splice Systems
The true strength of Fiber Products systems lies in the ability to combine different connector types. A SlimConnect 1RU module, for example, can accommodate 24 LC duplex and 12 E2000 simplex ports — ideal for mixed network architectures.
Front modules can be exchanged tool-free. Telecommunications operators can thus respond flexibly to changing requirements without replacing entire systems.
- Free mixing of all connector types in the same housing
- Pre-configured modules for rapid installation
- Retrofit capability without system replacement
- Standard 19-inch rack mounting to DIN 41494
- Documentation via QR codes on each module
LC, SC, E2000, ST, FC, MPO — Optimising Fibre Optic Connector Deployment
Choosing the right connector type depends on several factors: network tier, transmission distance, environmental conditions and existing infrastructure. As a manufacturer with 5 years’ warranty, Fiber Products supports optimal system configuration.
For FTTH deployment projects, LC connectors are recommended for their high port density. Backbone connections benefit from SC connector robustness. Security-critical areas rely on E2000 with automatic protection.
Technical Specifications and Standards Compliance
All connector types comply with relevant IEC, DIN and TIA standards. European manufacturing ensures consistent quality and short lead times for the DACH market.
| Standard | Scope of Application | Fiber Products Compliance |
|---|---|---|
| IEC 61754 | Connector standards | Fully compliant |
| IEC 61753-1 | Performance standards | Exceeded |
| DIN EN 50173 | Structured cabling | Certified |
| TIA-568 | Colour coding | Implemented |
Comprehensive quality control includes 100% end-face inspection and insertion loss measurement. Each splice module receives an individual measurement report.
FAQ: Frequently Asked Questions About Fibre Optic Connector Types
Which connector types are suitable for 400G applications?
For 400G Ethernet, MPO-24 or MPO-32 connectors are recommended, as well as LC duplex with ultra-low-loss specification. SlimConnect modules support both variants with insertion loss values below 0.20 dB.
Can different connector types be combined in the same module?
Yes, all Fiber Products splice modules allow free combination of LC, SC, E2000, ST, FC and MPO connectors in a single housing. The modular design enables individual configurations.
Which polish is optimal for long-distance applications?
For long-distance connections exceeding 10 km, APC polish (Angled Physical Contact) with 8° angle is recommended. Return loss achieves > 60 dB.
How many mating cycles do the connectors tolerate?
High-quality ceramic ferrules tolerate over 1000 mating cycles without performance loss. This significantly exceeds the industry standard of 500 cycles.
Are the connectors suitable for outdoor applications?
E2000 and specially IP-protected variants are suitable for outdoor installations. The temperature range of −40 °C to +85 °C covers all climatic requirements.
How is colour coding applied to different fibre types?
Colour coding follows TIA-568: yellow for single-mode PC, green for single-mode APC, beige for multimode OM1/OM2, aqua for OM3, violet for OM4.
The variety of LC, SC, E2000, ST, FC and MPO connectors at Fiber Products enables telecommunications operators maximum flexibility. From legacy network integration through to modern data centres — modular systems grow with your requirements. Explore the complete splice module portfolio or configure your custom solution with all available connector types.
Interested in Modular Fibre Optic Solutions?
Fiber Products GmbH – official DIAMOND SA Partner. Made in EU, 5 years’ warranty.
